| 의료용 할로겐램프의 가속수명시험에 관한 연구 |
| 정재한1, 김명수2, 임헌상3, 김용수4 |
1경기대학교 대학원 산업경영공학과
2수원대학교 산업공학과
3삼성전자(주)
4경기대학교 산업경영공학과 |
| A Study on Accelerated Life Test of Halogen Lamps for Medical Device |
| Jae Han Jung1, Myung Soo Kim2, Heonsang Lim3, Yong Soo Kim4 |
1Department of Industrial and Management Engineering, Graduate School, Kyonggi University
2Department of Industrial Engineering, Suwon University
3Samsung Electronics Co., Ltd.
4Department of Industrial and Management Engineering, Kyonggi University |
|
|
|
|
| |
| ABSTRACT |
Purpose:
The purpose of this study was to estimate life time of halogen lamps and acceleration factors using accelerated life test.
Methods:
Voltage was selected as an accelerating variable through the technical review about failure mechanism. The test was performed at 14.5V, 15.5V and 16.5 for 4,471 hours. It was assumed that the lifetime of Halogen lamps follow Weibull distribution and the inverse power life-stress relationship models.
Results:
Mean lifetimes of pin and screw types were 19,477 hours and 6,056 hours, respectively. In addition, acceleration factor of two items are calculated as 4.8 and 2.2 based on 15.5V, respectively.
Conclusion:
The life-stress relationship, acceleration factor, and MTTF at design condition are estimated by analyzing the accelerated life test data. These results suggest that voltage was very important factor to accelerate life time in the case of halogen lamps and the life time of pin type is three times longer than screw type lamps. |
| Key Words:
Halogen Lamp;Accelerated Life Test;Inverse Power Model;Medical Device; |
|
PDF Links
Full text via DOI
Download Citation 
